Takeuchi TB153FR Repair, Operator and Parts Manuals PDF

Language of the Manual: English and French
Takeuchi TB138 Service Repair Manual – 449 Pages
Takeuchi TB138 Operating Manual – 249 Pages
Parts Manual for TB138 – 403 Pages
Engine Manual for 4TNV88-PTBZ1 – 40 Pages
Takeuchi TB138 Service Manual – 449 Pages
For All applicable S/N
Two different Version of the Service Manual and Operating Manual – English and French

The Takeuchi TB153 manual is intended for persons who engage in maintenance operations, and explains procedures for disassembly and reassembly of the machine, check and maintenance procedures, maintenance reference values, troubleshooting and outline specifications, etc. Please use this Takeuchi manual for excavator TB153 as a reference in service activities to improve maintenance techniques.

Please note that the contents and diagrams included in this manual may not match your machine exactly.

Items or diagram which manual contains are subject to change without notice due to design modifications, etc. Always store the Takeuchi excavator manual near at hand preferably on the machine itself. When transferring ownership of this machine, be sure to provide the owner manual to the next owner.

Table of Content of TB153 Instructions Manual:

I . GENERAL
II . SPECIFICATIONS
III. MACHINE CONFIGURATION
IV. HYDRAULIC UNITS
V . TROUBLESHOOTING
VI. ENGINE

Before operating, perform the prescribe inspections and make repairs immediately should any irregularities be found. If a failure that causes loss of control such as steering, service brakes or engine occurs, stop the machine motion as quickly as possible, follow the shutdown procedure, and keep machine securely park until the problem is fixed.

Extract from the Service Manual:
TROUBLESHOOTING
| Symptom
| Probable Causes
| Remedy
| Secondary pressure doesnt
rise
| Primary pressure is insufficient
Spring is damaged or permanently
deformed
The clearance between the spool and
casing is abnormally large
There is looseness in the handle
| Keep the primary pressure
Replace the spring
Replace the spool and casing assembly
Disassemble and reassemble, or replace
the handle
| Secondary pressure doesnt
stabilize
| Sliding parts are catching
Tank line pressure fluctuates
Air gets mixed into the piping
| Repair or replace
Remove the abnormal portions of the
tank line
Operate the machine several times
and bleed out the air
| Secondary pressure is high
| Tank line pressure is high
Sliding parts are catching
| Remove the abnormal portions of the
tank line
Repair or replace