New Holland C185 & C190 Compact Track Loader Repair Manual PDF

Table of Contents (Repair Manual)

1. Fasteners should be replaced with the same or higher grade. If higher grade fasteners are used, these should only be tightened to the strength of the original.
2. Make sure the fasteners threads are clean and that thread engagement is started. This will prevent them from failing when being tightened.

3. Tighten plastic insert or crimped steel type lock nuts to approximately 50 % of the dry torque, applied to the nut, not to the bolt head. Tighten toothed or serrated type lock nuts to the full torque value.

4. The L9 (Alloy) fasteners torque values are for a bolt, nut, and two washers. When using L9 (Alloy) fasteners, do not use the values in this table for tapped holes. The New Holland C185 and C190 Manual Preface

This Manual has been written for the repair specialist. It provides important information on carrying out repair work expertly. Please go carefully through the Workshop Manual of the Track Loader before starting any repair work. Use the Workshop Manual of the C185 and C190 Loader as a reference book and source of information even if you are familiar with Track Loader technology. Using this the experience construction machine mechanic can carry out any necessary repairs expertly.

Sections of the Manual
Repair and Parts

Carry out any necessary repair work as soon as possible. This reduces repair costs and increases the availability of your Track Loader When doing any work on the Track Loader, always observe the instructions given in the Workshop Manual. Extensive works not described in this Workshop Manual will gladly be executed for you by your dealer. Always use original spare parts only.