Mitsubishi FBC15K, FBC18K, FBC18KL Forklift Repair Service Manual

Table of Contents

Mitsubishi FBC15K, FBC18K, FBC18KL Manual

Main sections and selected subjects identified in the source documentation:

• English
• Mitsubishi FBC15K, FBC18K, FBC18KL Lift Truck Manual
• Lift Truck Forklift Model: FBC15K, FBC18K, FBC18KL
• Forklift Manual Table of Content
• General Information
• Front Axle & Reduction Differential
• Transfer Assembly
• Rear Axle
• Brake System
• Steering System
• Hydraulic System
• Mast and Forks
• Troubleshooting Section
• Maintenance Service Data
• Tie Rods and Pins
• Kingpins
• Check the kingpins for any surface flaws such as grooving or stepped wear. Inspect the pins for cracks at the bearing shoulder.
• Kingpin Bearings
• Examine the rollers and bearing races for grooving, abrasive wear, pitting, bruising, or corrosion.
• Replace both the cup and cone of damaged bearings.
• Knuckles
• Inspect the inside of each knuckle for wear or damage. Be sure to examine for casting cracks.
• Check the tie rod pin hole. Examine the wheel nut threads for damage.
• Cylinder Rod
• Examine the rod for surface or plating damage.
• Inspect the rod for straightness. Examine the piston for damage. Check the tie rod pin hole for damage or wear.
• Seals and O-rings
• Examine all seals and O-rings for damage such as cuts and tears. Replace seals which show signs of aging.
• Hydraulic Pipes
• Inspect the hydraulic pipes for cracks, especially at the joints with the end fittings. Check for leaks.
• Tires
• Check the height of the solid rubber portion and, if worn down to 25.4 mm (1 in.), replace the tire.