Massey Ferguson 630, 650, 660, 680 Tractor Repair Service Manual

Table of Contents

Massey Ferguson 630, 650, 660, 680 Manual

Main sections and selected subjects identified in the source documentation:

• Model: Tractor 630, 650, 660, 680
• English
• Massey Ferguson 630, 650, 660, 680 Manual
• Manual Table of Content
• A …….. Introduction
• B ………. Splitting the Tractor
• C ……….Reserved
• D1…….. Carraro 4WD front axle: Ca 20.18, 20.21 and 20.29
• D2*…… ZF 4WD front axle: APL 345, 350 and 359
• * NOTE: It includes the primary drive box of the MF 630 and 650 tractors.
• This box is presented in Section G3.
• E ………. Perkins Engines
• F ……….Clutches
• G1…….. Constant Mesh type 12×4 gearbox
• G2…….. Eaton Synchromesh 12×4 gearbox
• G3…….. 12×5 gearbox – ZF T3500
• H ………Rear axle
• I1……… Ferguson hydraulic lift system
• I2……… Hydrotronic hydraulic lift system
• I3………Boschtronic hydraulic lift system
• J……….. Power take-off: live and independent
• L ………. Electrical System
• M ……… Auxiliary Hydraulic System
• N………. Cab, air conditioning system and heating
• O………. Tractors’ general basic specifications
• Manual Extract
• Reassembly and adjustment o f secondary driving box
• a) Reverse the disassembly procedure, observing the following:b) Install a new retainer (14) on the cover (12) and then apply Loctite sealant.
• c) Install the needle roller bearing (20) by using tool FT0081.
• d) Insert the axle (19) into the lodging.
• e) Install the lock-ring (18) with its ends facing up (see position in the figure) and then install the bearing (17) on the axle (19).
• f) Install the rear cover (12) and apply a sealing adhesive on the housing seating surface: Loctite 515 or Three Bond