Massey Ferguson 3610, 3630, 3650, 3655 Tractor Repair Service Manual

Table of Contents

Massey Ferguson 3610, 3630, 3650, 3655 Manual

Main sections and selected subjects identified in the source documentation:

• English
• Massey Ferguson 3610, 3630, 3650, 3655 Manual
• Model: Tractor 3610, 3630, 3650, 3655
• Manual Table of Content
• Introduction
• Cab and Equipment
• Splitting the Tractor
• Engine
• Gearbox
• Rear Axle
• Manual Extract Uncoupling
• Disconnect the two 4WD front axle control hoses.
• Plug the pipe connections.
• Remove the guard and the 4WD transmission shaft.
• Remove the sheet metal panels. Disconnect the earth cables only from the batteries.
• Disconnect and mark the positions of hoses and flexible connections, as follows
• the hose from the left-hand side cover towards the cooler,
• the harness connecting the vacuum tester, the 7.5 A and 10 A fuses and the red wire to the positive terminals of the batteries,
• the positive cable on the starter, – the inlet sleeve between the turbocharger and the air filter,
• the suction pipe between the air filter and the exhaust pipe.
• Drain the cooling system. Disconnect the lower and upper hoses from the radiator.
• Remove the upper attachment on the radiator.
• Remove the air conditioning compressor and bracket assembly and tilt it forwards with its two hoses (according to option fitted).
• Remove the front earth connections.
• Immobilise the tractor. Carry out procedure 6, section 3 B01.
• Loosen the bolts attaching the engine to the front frame.
• Support the tractor under the frame using a trolley jack and separate the engine from the frame (Fig. 1 ).