Overview
The Massey Ferguson 1235 tractor repair service manual provides a technical reference for the covered equipment. Its purpose is to help locate information relevant to inspection, troubleshooting, servicing and repair, as applicable to the supplied publication.
The supplied contents outline identifies Type, Massey Ferguson 1235 Tractor Manual, Model and Manual Table of Content. The table below follows the provided section names and selected topics; consult the manual for the exact procedures and specifications.
Table of Contents
Massey Ferguson 1235 Manual
Main sections and selected subjects identified in the source documentation:
- Type: Workshop Manual
- Massey Ferguson 1235 Tractor Manual
- Model: Tractor 1235
- Manual Table of Content
- General Information
- Functional Blocks
- Engine
- Engine Accessories
- Clutch
- Transmission
- Rear Axle and Brakes
- Front Axle
- Steering System
- Hydraulic System
- Electrical
- Service Standards
- Rear Transmission Oil & Filters
- Rear transmission oil lubricates the transmission, center housing, rear axles, and also serves as hydraulic fluid.
- Rear transmission oil and filters should be changed/ cleaned after first 50 hours of operation and then every 200 hours thereafter.
- Oil level is replenished, as necessary, by removing filler plug, 2, and adding oil through filler opening.
- NOTE: Adding oil to transmission will also maintain correct oil level in center housing and rear axles.
- Completely drain oil from system.
- IMPORTANT: Completely lower three-point hitch prior to draining transmission oil.
- Clean filter in solvent or kerosene, dry thoroughly and reinstall. Make sure seal is not damaged.
- Apply sealant to threads on drain plug(s) and reinstall.
- Refill system with clean oil to level as detailed.
Using the Technical Reference
Use the identified sections to locate relevant information, and follow any model-specific instructions, limits and precautions in the original documentation.










Reviews
There are no reviews yet.