Liebherr FMV 075, FMV 100, FMV 140, FMV 165, FMV 250 Axial Piston Motor Operators Manual

Table of Content FMV 075, FMV 100, FMV 140, FMV 165, FMV 250 Axial Piston Operating Manual

1 Symbols and safety instructions
1.1 Symbols in the Operating instructions
1.1.1 Identification of operational safety instructions
1.1.2 Additional identifications
1.2 Safety instructions
1.2.1 General safety instructions
1.2.2 Intended use
1.2.3 Improper use
1.2.4 Changes to the hydraulic unit
1.2.5 Avoiding personal injury
1.2.6 Prevention of property damage
1.2.7 Prevention of environmental damage
1.3 Target group
1.3.1 Unauthorised personnel
1.4 Limitation of liability
1.5 Personal protective equipment
1.6 Operating and maintenance areas
1.6.1 Operating area
1.6.2 Maintenance areas
1.7 Machine safety / Functional safety
1.8 Signs
2 Handling
2.1 Scope of delivery
2.2 Unpacking
2.3 Transport
2.3.1 Transport by hand
2.3.2 Transport with lifting equipment
2.4 Storage
2.4.1 Preservation with VCI corrosion protection film
2.4.2 Removing preservation with VCI corrosion protection film
2.4.3 Preservation with corrosion protection wax
2.4.4 Removing preservation with corrosion protection wax
2.5 Cleaning
2.5.1 Cleaning with cleaning agent
2.5.2 Cleaning with steam jet machine
2.6 Storage time
2.6.1 New condition (original packaging)
2.6.2 Used and new condition up to 24 months
2.7 Special approvals
2.8 Disposal
2.8.1 Information and tips
2.8.2 Disposal company
3 Hydraulic fluids
3.1 General information
3.2 Fill quantity
3.3 Filtering
3.4 Analysing hydraulic fluid
3.4.1 Filling and venting the hydraulic product
3.5 Shaft lip seal
3.5.1 General information
3.5.2 Temperature range
4 Assembly and disassembly
4.1 General information
4.1.1 General standard conditions
4.1.2 Accessibility of the hydraulic product
4.1.3 Ambient temperature
4.1.4 Necessary tool
4.1.5 Preparatory work
4.1.6 Preparation for further use/storage
4.1.7 Final decommissioning
4.2 Hydraulic hoses and lines
4.2.1 Expansion and conversion with other pieces of equipment
4.3 Connections
5 Commissioning
5.1 Preparatory work
5.2 Initial commissioning
5.2.1 Running-in phase
5.2.2 Functional test
5.3 Commissioning after use/storage
5.4 Settings
5.5 Ventilation
5.6 Flushing run of the whole system
5.7 Operation
6 Maintenance and inspection
6.1 Maintenance condition
6.1.1 Maintenance schedule
6.2 Repairs
6.3 Spare parts
7 Faults and troubleshooting
7.1 Rectifying faults
7.1.1 Error code table