Kubota R310, R310B, R410 & R410B Wheel Loader Repair Manual

Kubota R310, R310B, R410, R410B Wheel Loader Workshop Service Manual
Kubota Wheel Loader Model R310, R310B, R410, R410B

Table of Content of the Workshop Service Manual

0 – Precautions
I – General
II – A-LST System
III -Power Train
IV -Brake System
V -Steering System
VI -Front Loader
VII – Backhoe
VIII- Structure
IX – Engine
X- Electrical
XI-Option Units & Attachments

Your KUBOTA dealer is always ready to help so that your Wheel Loader offers the best performance. After having carefully read this manual, you will realize that much of the routine maintenance can be done by yourself. Machines must be disassembled and assembled efficiently and safely. It is very important to thoroughly understand the construction and function of the machine, to make all appropriate preparations, and start operations according to the specified working procedures in R310, R310B, R410, R410B Wheel Loader workshop service manual.

IMPORTANT INSPECTION ITEMS AFTER REASSEMBLING
a Operate the Kubota R310, R310B, R410, R410B Wheel Loader and check for Unusual Noise and Vibrations.
b Make Sure the Safety decals and Wire harness Clamps are in their Specified Positions.

c With the Machine Front in a Specified Posture, Check the Amount of Hydrauric Oil Checking the oil level (For further details, refer to the Wheel Loader R310, R310B, R410, R410B Operators Manual)

1) Park the machine on a level ground.
2) Make sure the hydraulic oil temperature is in the range of 10-30C (50-86F) and see if the oil level is within the specified zone of the oil level gauge.
3) Keep the machine front as shown as following posture.