Kubota RTV400Ci Utility Vehicle Repair Manual PDF

Kubota Utility Vehicle Model RTV400CI

Table of Content of the Workshop Service Manual

This Workshop Manual tells the servicing personnel about the mechanism, servicing and maintenance of the RTV400Ci. It contains 4 parts: “Information”, “General”, “Mechanism” and “Servicing”.
Information
This section primarily contains information below.
Safety First
Safety Decal
Dimension
General
This section primarily contains information below.
Engine Identification
Model Identification
General Precautions
Maintenance Check List
Check and Maintenance
Special Tools
Mechanism
This section contains information on the structure and the function of the unit. Before you continue with the subsequent sections, make sure that you read this section.
Refer to the latest version of Workshop Manual (Code No. 9Y021-01870 / 9Y021-18200) for the diesel engine / Utility Vehicle mechanism that this workshop manual does not include.
Servicing RTV400CI Utility Vehicle
This section primarily contains information below.
Troubleshooting
Servicing Specifications
Tightening Torques
Checking, Disassembling and Servicing

Your KUBOTA dealer is always ready to help so that your Utility Vehicle offers the best performance. After having carefully read this manual, you will realize that much of the routine maintenance can be done by yourself. Machines must be disassembled and assembled efficiently and safely. It is very important to thoroughly understand the construction and function of the machine, to make all appropriate preparations, and start operations according to the specified working procedures in RTV400CI Utility Vehicle workshop service manual.

Replacing Fuse Kubota RTV400CI Utility Vehicle
Before replacing a blown fuse, determine why the fuse blew and make any necessary repairs. Failure to follow this procedure may result in serious damage to the vehicle electrical system.
Replacement procedure
1. Disconnect the negative cable of the battery.
2. Remove the cover and the fuse box cover.
3. Pull out the blown fuse using fuse puller in the fuse box.
4. Insert a new fuse into the fuse box.
5. Install the fuse box cover.
6. Connect the negative battery cable.