Kubota STV32, STV36 & STV40 Tractor Repair Manual PDF

Kubota Tractor Model STV32, STV36, STV40

Table of Content of the Workshop Service Manual

This Workshop Manual has been prepared to provide servicing personnel with information on the mechanism, service and maintenance of STV32, STV36 and STV40. It is divided into three parts, “General”, “Mechanism” and “Servicing”.

General
Information on the tractor identification, the general precautions, maintenance check list, check and maintenance and special tools are described.
Mechanism
Information on the construction and function are included. This part should be understood before proceeding with troubleshooting, disassembling and servicing.
Refer to Diesel Engine / Tractor Mechanism Workshop Manual (Code No. 97897-01872 / 97897-18200) for the one which has not been described to this workshop manual.
Servicing

Information on the troubleshooting, servicing specification lists, tightening torque, checking and adjusting, disassembling and assembling, and servicing which cover procedures, precautions, factory specifications and allowable limits.

All information illustrations and specifications contained in this manual are based on the latest product information available at the time of publication

Your KUBOTA dealer is always ready to help so that your tractor offers the best performance. After having carefully read this manual, you will realize that much of the routine maintenance can be done by yourself. Machines must be disassembled and assembled efficiently and safely. It is very important to thoroughly understand the construction and function of the machine, to make all appropriate preparations, and start operations according to the specified working procedures in STV32, STV36, STV40 tractor workshop service manual.

Changing Front Axle Case Oil
Be sure to stop the engine before changing the front axle case oil.
A Allow engine to cool down sufficiently, oil can be hot and can burn.
1. Remove the both right and left drain plugs (2) at bottom of the bevel gear case.
2. Drain the front axle STV32, STV36, STV40 tractor case oil.
3. After draining, screw in the two drain plugs.
4. Fill new oil from filling port with specified amount