Kubota L3130, L3430, L3830, L4330, L4630, L5030 Tractor Repair Manual

Kubota L3130, L3430, L3830, L4630, L5030 Tractor Workshop Manual – 619 Pages
Kubota L4330 Tractor Workshop Manual – 682 Pages
Kubota Tractor Model L3130, L3430, L3830, L4330, L4630, L5030

Table of Content of the Workshop Service Manual

This Workshop Manual has been prepared to provide servicing personnel with information on the mechanism, service and maintenance of KUBOTA Tractor L3130, L3430, L3830, L4630 and L5030. It is divided into two parts, Mechanism and Servicing for each section.

Mechanism
Information on the construction and function are included. This part should be understood before proceeding with troubleshooting, disassembling and servicing.
Refer to Diesel engine / Tractor Mechanism Workshop Manual (Code No. 9789701872 / 97897-18200) for the one which has not been described to this workshop manual.
Servicing

The heading General includes general precautions, check and maintenance and special tools. Other section, there are troubleshooting, servicing specification lists, checking and adjusting, disassembling and assembling, and servicing which cover procedures, precautions, factory specifications and allowable limits.

All information illustrations and specifications contained in this manual are based on the latest product information available at the time of publication.
L3130, L3430, L3830, L4330, L4630, L5030

Your KUBOTA dealer is always ready to help so that your tractor offers the best performance. After having carefully read this manual, you will realize that much of the routine maintenance can be done by yourself. Machines must be disassembled and assembled efficiently and safely. It is very important to thoroughly understand the construction and function of the machine, to make all appropriate preparations, and start operations according to the specified working procedures in this workshop service manual.

IMPORTANT INSPECTION ITEMS AFTER REASSEMBLING
a Operate the Kubota L3130, L3430, L3830, L4330, L4630, L5030 Tractor and check for Unusual Noise and Vibrations.
b Make Sure the Safety decals and Wire harness Clamps are in their Specified Positions.

c With the Machine Front in a Specified Posture, Check the Amount of Hydrauric Oil Checking the oil level (For further details, refer to the Tractor L3130, L3430, L3830, L4330, L4630, L5030 Operators Manual)

1) Park the machine on a level ground.
2) Make sure the hydraulic oil temperature is in the range of 10-30C (50-86F) and see if the oil level is within the specified zone of the oil level gauge.
3) Keep the machine front as shown as following posture.