Kubota BX1500 Tractor Repair Manual PDF

Table of Content of the Workshop Service Manual

This Workshop Manual has been prepared to provide servicing personnel with information on the mechanism, service and maintenance of KUBOTA Tractor BX 1500. It is divided into two parts, “Mechanism” and “Servicing” for each section.

Mechanism
Information on the construction and function are included. This part should be understood before proceeding with troubleshooting, disassembling and servicing.
Refer to Diesel engine / Tractor BX1500 Mechanism Workshop Manual (Code No. 97897-01872 / 97897-18200) for the one which has not been described to this workshop manual.
Servicing

The heading “General” includes general precautions, check and maintenance and special tools. Other section, there are troubleshooting, servicing specification lists, checking and adjusting, disassembling and assembling, and servicing which cover procedures, precautions, factory specifications and allowable limits.

All information illustrations and specifications contained in this BX1500 manual are based on the latest product information
available at the time of publication.
Adjusting Brake Pedal Free Travel for the Tractor BX1500
A Stop the engine, remove the key, lower the implement to the ground, and chock the wheels before checking brake pedal.
A Even if the brake pedal free travel is within the limitation, adjust the brake pedal following the procedure below.
1. Release the parking brake.
2. Loosen the lock nut and turn the turnbuckle to adjust the rod length so that the brake pedal free travel is 10 mm (0.39 in.).
3. Extend the turnbuckle one additional turn.
4. Retighten the lock nut.
5. Depress the brake pedal several times and make sure the brake pedal free travel is from 20 to 30 mm (0.79 to 1.18 in.).