Kubota B7400, B7500 Tractor Repair Manual

Kubota Tractor Model B7400, B7500

Table of Content of the Workshop Service Manual

GENERAL
1 ENGINE
MECHANISM
SERVICING
2 CLUTCH
MECHANISM
SERVICING
3 TRANSMISSION
MECHANISM
SERVICING
4 REAR AXLE
MECHANISM
SERVICING
5 BRAKES
MECHANISM
SERVICING
6 FRONT AXLE
MECHANISM
SERVICING
7 STEERING
MECHANISM
SERVICING
8 HYDRAULIC SYSTEM
MECHANISM
SERVICING
9 ELECTRICAL SYSTEM
MECHANISM
SERVICING
B7400, B7500

Your KUBOTA dealer is always ready to help so that your excavator offers the best performance. After having carefully read this manual, you will realize that much of the routine maintenance can be done by yourself. Machines must be disassembled and assembled efficiently and safely. It is very important to thoroughly understand the construction and function of the machine, to make all appropriate preparations, and start operations according to the specified working procedures in this workshop service manual.

IMPORTANT INSPECTION ITEMS AFTER REASSEMBLING
a Operate the Kubota B7400, B7500 Tractor and check for Unusual Noise and Vibrations.
b Make Sure the Safety decals and Wire harness Clamps are in their Specified Positions.
c With the Machine Front in a Specified Posture, Check the Amount of Hydrauric Oil Checking the oil level (For further details, refer to the Tractor B7400, B7500 Operators Manual)
1) Park the machine on a level ground.
2) Make sure the hydraulic oil temperature is in the range of 10-30C (50-86F) and see if the oil level is within the specified zone of the oil level gauge.
3) Keep the machine front as shown as following posture.
This Kubota Tractor Workshop Manual provides service personnel with information about the mechanisms, service
and maintenance of the construction machinery. This Workshop Manual is divided into 3 sections,
General, Mechanisms and Service.