Kubota B2650HSDC, B3350HSDC Tractor Repair and Operator Manuals

Kubota B2650HSDC, B3350HSDC Tractor Workshop Manual – 470 Pages
Kubota B2650HSDC, B3350HSDC Tractor Operators Manual – 110 Pages
Kubota Tractor Model B2650HSDC, B3350HSDC

Table of Content of the Workshop Service Manual

This Workshop Manual tells the servicing personnel about the mechanism, servicing and maintenance of the B2650HSDC and B3350HSDC. It contains 4 parts: “Information”, “General”, “Mechanism” and “Servicing”.

– Information
This section primarily contains information below.
Safety First
Safety Decal
Dimensions
– General
This section primarily contains information below.
Engine Identification
Model Identification
General Precautions
Maintenance Check List
Check and Maintenance
Special Tools
– Mechanism
This section contains information on the structure and the function of the unit. Before you continue with the subsequent sections, make sure that you read this section.
Refer to the latest version of Workshop Manual (Code No. 9Y021-01870 / 9Y021-18200) for the diesel engine / tractor mechanism that this workshop manual does not include.
– Servicing
This section primarily contains information below.
Troubleshooting
Servicing Specifications
Tightening Torques
Checking, Disassembling and Servicing
IMPORTANT INSPECTION ITEMS AFTER REASSEMBLING
a Operate the Kubota B2650HSDC, B3350HSDC Tractor and check for Unusual Noise and Vibrations.
b Make Sure the Safety decals and Wire harness Clamps are in their Specified Positions.
c With the Machine Front in a Specified Posture, Check the Amount of Hydrauric Oil Checking the oil level (For further details, refer to the Tractor B2650HSDC, B3350HSDC Operators Manual)
1) Park the machine on a level ground.
2) Make sure the hydraulic oil temperature is in the range of 10-30C (50-86F) and see if the oil level is within the specified zone of the oil level gauge.
3) Keep the machine front as shown as following posture.