Kubota W5019, W5019-P, W5019-PC, W5019-T, W5019-TC Mower Repair Manual

Kubota W5019, W5019-P, W5019-PC, W5019-T, W5019-TC Mower Workshop Service Manual

Kubota Mower Model W5019, W5019-P, W5019-PC, W5019-T, W5019-TC

Format: PDF

Language: English

Kubota W5019, W5019-P, W5019-PC, W5019-T, W5019-TC Mower Workshop Service Manual – 162 Pages

Table of Content of the Mower W5019, W5019-P, W5019-PC, W5019-T, W5019-TC Workshop Service Manual

Checking Air Cleaner Element

1.Unscrew two wing screws (1), remove the air cleaner cover (2) and take out the paper and urethane elements.

2.Paper element (4) : Blow the dust off the element from inside with compressed air. Replace the element with a new one if it is excessively dirty.

3.Urethane element (3) : Wash the element with liquid detergent. Rinse and dry it well.

(1)Wing Screw

(2) Air Cleaner Cover

(3) Urethane Element

(4) Paper Element

Checking Engine Oil level

1.Place the machine on a flat surface (level the engine).

2. Check the oil level before starting the engine or wait at least 5 minutes after stopping the engine.

3.Unscrew the oil level dipstick (1), wipe it clean, then screw it in again well.

4. Remove the gauge again and check that the oil level is between the upper (a) and lower (b) Iim’lts.

5. If the level is too low, supply fresh oil until the specified level is reached .

IMPORTANT

Use the specified engine oil. Refer to “LUBRICANTS AND FUEL”. (See page S·3)

When using new oil of a different maker or viscosity from the previous one, drain all used oil. Never mix two different types of oil.