Kubota T1880, T2080 & T2380 Lawn Tractor Repair Manual PDF

Kubota Mower Model T1880, T2080, T2380
Kubota T1880, T2080, T2380 Mower Workshop Manual – 585 Pages
Kubota T1880, T2080, T2380 Mower Operating Manual – 78 Pages

Table of Content of the Mower T1880, T2080, T2380 Workshop Service Manual

This Workshop Manual has been prepared to provide servicing personnel with information on the mechanism, service and maintenance of KUBOTA Mower T1880, T2080, T2380 . It is divided into three parts, General, Mechanism and Servicing for each section.

General
Information on the tractor identification, the general precautions, maintenance check list, check and maintenance and special tools are described.
Mechanism
Information on the construction and function are included. This part should be understood before proceeding with troubleshooting, disassembling and servicing.
Servicing of the T1880, T2080, T2380

Information on the troubleshooting, servicing specification lists, tightening torque, checking and adjusting, disassembling and assembling and servicing which cover procedures, precautions, factory specifications and allowable limits.

All information illustrations and specifications contained in this manual are based on the latest product information available at the time of publication.

This T1880, T2080, T2380 Mower machine is a product of KUBOTA’s quality engineering and manufacturing. It is made of excellent materials and under a rigid quality control system. It will give you long, satisfactory service. To obtain the best use of your machine, please read this manual carefully. It will help you become familiar with the operation of the machine and contains many helpful hints about machine maintenance.

MAKING THE MOST OF YOUR MOWER
1. When using your mower for the first time, choose a smooth level area and cut in straight and slightly overlapping strips.

2. The size and type of the area to be mowed will determine the proper mowing pattern. Take into account obstructions, such as trees, fences and buildings. To keep grass clippings off fences, sidewalks, etc., it is advisable to go over the outside of the area to be mowed several times in a clockwise direction. To mow the area remaining, work in a counterclockwise direction so that the clippings are dispersed onto the previously cut area.

3. Always keep the left side of the mower toward trees, posts or other obstacles on the first trip around the obstacle.
4. Most lawns should be mowed to keep the grass approximately 50 to 80 mm (2 to 3 in.) high. Best results are obtained by cutting often and not too short.
To keep a green lawn, never mow more than 1/3 of the height of the grass or a maximum of 25 mm (1 in.) in 1 mowing.

For extremely tall grass, set the cutting height at maximum cutting height for the first mowing, then reset to the desired height and mow again. Allow the grass to grow to 80 mm (3 in.), then cut off only the top inch.

5. For best appearance, grass should be cut in the afternoon or evening when it is free of moisture.