Kubota GZD15 Zero Turn Mowers Repair Manual

Kubota GZD15 Mower Workshop Service Manual
Kubota Mower Model GZD15

Table of Content of the Mower GZD15 Workshop Service Manual

This Workshop Manual has been prepared to provide servicing personnel with information on the mechanism, service and maintenance of GZD15. It is divided into two parts, “Mechanism” and “Servicing” for each section.

Information on the features and new mechanisms are described. This information should be understood before proceeding with troubleshooting, disassembling and servicing.

The heading “General” includes general precautions, check and maintenance and special tools. Other section, there are troubleshooting, checking and adjusting, disassembling and assembling, and servicing which cover procedures, precautions, factory specifications and allowable limits.

All information illustrations and specifications contained in this manual are based on the latest product information available at the time of publication.
Manual Extract Replacing Engine Oil Filter Cartridge
– Be sure to stop the engine before changing the oil filter cartridge.
– Allow engine to cool down sufficiently, oil can be hot and may cause burns.
1. Remove the engine oil filter cartridge (1) with the filter wrench.
2. Apply a slight coat of oil onto the rubber gasket of new cartridge.
3. To install the new cartridge, screw it in by hand. Over tightening may cause deformation of rubber gasket.
4. After the cartridge has been replaced, the engine oil level normally lowers a little. Add engine oil to proper level. Check for oil leaks around filter gasket.
To prevent serious damage to the engine, element of recommended type must be used. Use only a genuine KUBOTA filter or its equivalent.