Komatsu SK1026-5, SK1026-5N Skid Steer Loader Repair Service Manual

Table of Contents

Komatsu SK1026-5, SK1026-5N Manual

Main sections and selected subjects identified in the source documentation:

• Serial Numbers
• CEBM014201- A80001 and up
• WEBM006000- 37CTF50001 and up
• Manuals: Shop Manual
• 10 STRUCTURE AND FUNCTION
• 20 TESTING AND ADJUSTING
• 30 DISASSEMBLY AND ASSEMBLY
• 40 MAINTENANCE STANDARD
• This SK1026-5, SK1026-5N shop manual is an aid to improve the quality of repairs by giving the operator an accurate
• understanding of the product and by showing him the correct way to perform repairs and make judgements. Make sure
• you understand the contents of this manual and use it to full effect at every opportunity.
• workshop.
• following sections.
• STRUCTURE AND FUNCTION
• This section explains the structure and function of each component. It serves not only to give an understanding
• of the structure, but also serves as reference material for troubleshooting.
• TESTING AND ADJUSTMENTS
• Troubleshooting charts correlating Problems to Causes are also included in this section.
• REMOVAL AND INSTALLATION
• STANDARD MAINTENANCE
• This section gives the judgement standards when inspecting disassembled parts
• System Performance Test
• Place fan in front of condenser to simulate normal ram air flow and allow system to stabilize.
• Place a thermometer in air conditioning vent closest to evaporator.
• Evaluate the readings obtained from the gauges to see if they match the readings for the ambient temperature.
• As preliminary steps to begin checkout of the system, perform the following: A. Close all windows and doors to the cab.
• B. Set air conditioning system at maximum cooling and blower speed operation.
• C. Readings on the two manifold gauges should be within normal range, adjust for ambient temperature.