Overview
The Komatsu PC128UU-2 excavator repair service manual provides a technical reference for the covered equipment. Its purpose is to help locate information relevant to inspection, troubleshooting, servicing and repair, as applicable to the supplied publication.
The supplied contents outline identifies Manuals, 01 GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 01-1, 10 STRUCTURE AND FUNCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1 and 20 TESTING, ADJUSTING AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-1. The table below follows the provided section names and selected topics; consult the manual for the exact procedures and specifications.
Important Information: Confirm the applicable serial-number or production range in the supplied documentation before selecting a procedure.
Table of Contents
Komatsu PC128UU-2 Manual
Main sections and selected subjects identified in the source documentation:
- Manuals: Shop Manual
- 01 GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 01-1
- 10 STRUCTURE AND FUNCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
- 20 TESTING, ADJUSTING AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-1
- 30 DISASSEMBLY AND ASSEMBLY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-1
- 90 OTHER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90-1
- GENERAL
- STRUCTURE, FUNCTION AND MAINTENANCE STANDARD
- TESTING, ADJUSTING AND TROUBLESHOOTING
- DISASSEMBLY AND ASSEMBLY KOMATSU Excavator PC128UU-2
- When raising heavy components, use a hoist or crane. Check that the wire rope, chains and hooks are free from damage.
- Manual Extract – Troubleshooting
- | Display
- Code
- | Abnormal system
- | Nature of abnormality
- | 71
- | Boom RAISE stop solenoid EPC system
- | 1) Disconnection inside solenoid
- 2) Short circuit inside solenoid or short circuit with ground
- 3) Disconnection in wiring harness between C16(1), (2) – COI, or short circuit with ground
- | 72
- | Boom LOWER stop EPC solenoid system
- 3) Disconnection in wiring harness between C14(1), (2) – COI, or short circuit with groud
- | C1
- | Boom RAISE pressure switch and
- boom LOWER pressure switch input at
- same time for more than 3 seconds
- | Defective boom RAISE or boom LOWER pressure switch
Serial-Number Applicability
The covered production ranges or serial groups may affect the applicable procedures. Check the identification details on the machine against the source documentation.










Reviews
There are no reviews yet.