Komatsu Dresser TD-40C Dozer Repair Service Manual
Komatsu Dresser TD-40C Dozer Repair Service Manual - Image 2
Komatsu Dresser TD-40C Dozer Repair Service Manual - Image 3
Komatsu Dresser TD-40C Dozer Repair Service Manual - Image 4
Komatsu Dresser TD-40C Dozer Repair Service Manual - Image 5
Komatsu Dresser TD-40C Dozer Repair Service Manual
Komatsu Dresser TD-40C Dozer Repair Service Manual - Image 2
Komatsu Dresser TD-40C Dozer Repair Service Manual - Image 3
Komatsu Dresser TD-40C Dozer Repair Service Manual - Image 4
Komatsu Dresser TD-40C Dozer Repair Service Manual - Image 5

THE MANUAL LIBRARY

Komatsu Dresser TD-40C Dozer Repair Service Manual

$35.00

Technical Details

Brand Komatsu
Models Covered Dresser TD-40C
Machine Type Dozer
Documentation Repair Service Manual
Publication Number(s) SMTD40C98-1E
Language English
Format PDF

What’s Included

  • Repair Manual — 425 Pages
SKU: AGRM-0001500 Category: Brand:

Overview

The Komatsu Dresser TD-40C dozer repair service manual provides a technical reference for the covered equipment. Its purpose is to help locate information relevant to inspection, troubleshooting, servicing and repair, as applicable to the supplied publication.

The supplied contents outline identifies Manuals, INTRODUCTION, COOLING SYSTEM and ELECTRICAL. The table below follows the provided section names and selected topics; consult the manual for the exact procedures and specifications.

Important Information: Confirm the applicable serial-number or production range in the supplied documentation before selecting a procedure.

Table of Contents

Komatsu Dresser TD-40C Manual

Main sections and selected subjects identified in the source documentation:

  • Manuals: Shop Manual
  • INTRODUCTION
  • COOLING SYSTEM
  • ELECTRICAL
  • ENGINE
  • HYDRAULIC TORQUE CONVERTER
  • TRANSMISSION
  • STEERING SYSTEM
  • SPROCKET DRIVE
  • TRACK AND TRACK FRAME ASSEMBLY
  • HYDRAULIC
  • 10A. PUMPS
  • 10B. VALVES
  • 10C. CYLINDERS
  • MOUNTED EQUIPMENT
  • Carefully hoist radiator assembly up and over frame.
  • DISASSEMBLY (Refer Fig. 2.6)
  • Support radiator in an upright position. Remove over flow tube (1).
  • Disassembly tie rods (9).
  • Remove mounting hardware from top tank (2) and remove header bars (5).
  • Remove top tank (2) and discard gaskets (3). Turn radiator over and support it on top flange of core (4).
  • Remove mounting hardware from bottom tank (12) and remove header bars (11). Remove bottom tank and discard gasket (3a).
  • Remove mounting hardware secure side channels (6 and 6a) to spacer (8).
  • Remove mounting hardware secure top (4) and bottom (10) core and remove header bars (7).
  • Remove spacer (8) and discard gaskets (13).
  • INSPECTION AND REPAIR
  • IMPORTANT: When removing rubber bushings from an assembled radiator, do not allow the puller rod to contact and damage the radiator core fins.

Serial-Number Applicability

The covered production ranges or serial groups may affect the applicable procedures. Check the identification details on the machine against the source documentation.

Reviews

There are no reviews yet.

Be the first to review “Komatsu Dresser TD-40C Dozer Repair Service Manual”