Komatsu D155AX-8 Dozer Repair Service Manual
Komatsu D155AX-8 Dozer Repair Service Manual - Image 2
Komatsu D155AX-8 Dozer Repair Service Manual - Image 3
Komatsu D155AX-8 Dozer Repair Service Manual - Image 4
Komatsu D155AX-8 Dozer Repair Service Manual - Image 5
Komatsu D155AX-8 Dozer Repair Service Manual
Komatsu D155AX-8 Dozer Repair Service Manual - Image 2
Komatsu D155AX-8 Dozer Repair Service Manual - Image 3
Komatsu D155AX-8 Dozer Repair Service Manual - Image 4
Komatsu D155AX-8 Dozer Repair Service Manual - Image 5

THE MANUAL LIBRARY

Komatsu D155AX-8 Dozer Repair Service Manual

$38.00

Technical Details

Brand Komatsu
Models Covered D155AX-8
Machine Type Dozer
Documentation Repair Service Manual
Publication Number(s) SEN06497-06, TEN00661-02 and GEN00128-02
Language English
Format PDF

What’s Included

  • Repair Manual — 3121 Pages
  • Operator’s Manual — 477 Pages
  • Field Assembly Manual — 93 Pages
SKU: AGRM-0002891 Category: Brand:

Overview

The Komatsu D155AX-8 dozer repair service manual provides a technical reference for the covered equipment. Its purpose is to help locate information relevant to inspection, troubleshooting, servicing and repair, as applicable to the supplied publication.

The supplied contents outline identifies Manuals, Index and Foreword, Specification and Structure and Functions. The table below follows the provided section names and selected topics; consult the manual for the exact procedures and specifications.

Important Information: Confirm the applicable serial-number or production range in the supplied documentation before selecting a procedure.

Table of Contents

Komatsu D155AX-8 Manual

Main sections and selected subjects identified in the source documentation:

  • Manuals: Shop Manual, Operation and Maintenance Manual and Field Assembly Manual
  • Index and Foreword
  • Specification
  • Structure and Functions
  • Standard Value Table
  • Testing and Adjusting
  • Troubleshooting
  • Disassembly and Assembly
  • Appendix
  • Circuit Diagrams
  • Index
  • Bleeding air and flushing of cylinder with piston valve (blade lift cylinder)
  • i) While running the engine at low idle, extend and retract the cylinder for 5 minutes.
  • However, do not move the cylinder to the stroke end.
  • a Operate the piston rod to approx. 100 mm from the end of the stroke; do not relieve the circuit under any circumstances.
  • Bleeding air and flushing of cylinder without piston valve (Blade tilt cylinder, ripper lift cylinder, ripper tilt cylinder)
  • i) Check the oil level in the hydraulic tank.
  • ii) While running the engine at low idle, extend and retract the cylinder for 5 minutes.

Serial-Number Applicability

The covered production ranges or serial groups may affect the applicable procedures. Check the identification details on the machine against the source documentation.

Reviews

There are no reviews yet.

Be the first to review “Komatsu D155AX-8 Dozer Repair Service Manual”