Komatsu D155AX-6 Dozer Repair Service Manual

Table of Contents

Komatsu D155AX-6 Manual

Main sections and selected subjects identified in the source documentation:

• Manuals: Shop Manual and Operation and Maintenance Manual
• 00 Index and foreword
• 01 Specification
• 10 Structure, function and maintenance standard
• 20 Standard value table
• 30 Testing and adjusting
• 40 Troubleshooting
• 50 Disassembly and assembly
• 80 Air conditioner
• 90 Diagrams and drawings
• Index and foreword
• This section explains the shop manuals list, table of contents, safety, and basic information.
• Specification
• This section explains the specifications of the machine.
• Structure, function and maintenance standard
• Standard value table
• Testing and adjusting
• Troubleshooting
• Disassembly and assembly
• Appendix
• Diagrams and drawings (chassis volume)/Repair and replacement of parts (engine volume)
• Chassis volume
• This section gives hydraulic circuit diagrams and electrical circuit diagrams.
• Engine volume
• This section explains the method of reproducing, repairing, and replacing parts.
• Clearance limit
• Parts can be used until the clearance between them is increased to a certain limit.
• The limit at which those parts cannot be used is called the "clearance limit".
• If the clearance between the parts exceeds the clearance limit, they must be replaced or repaired.
• Interference limit
• The allowable maximum interference between the hole of a part and the shaft of another part to be assembled is called the "interference limit".
• The interference limit shows the repair limit of the part of smaller tolerance.