Komatsu CK35-1 Skid Steer Loader Repair Service Manual

Table of Contents

Komatsu CK35-1 Manual

Main sections and selected subjects identified in the source documentation:

• Serial Numbers
• A40001 and up
• F00003 and up
• Manuals: Shop Manual
• STRUCTURE AND FUNCTION
• TESTING AND ADJUSTING
• REMOVAL AND INSTALLATION
• MAINTENANCE STANDARD
• OTHER
• This CK35-1 shop manual is an aid to improve the quality of repairs by giving the operator an accurate
• understanding of the product and by showing him the correct way to perform repairs and make judgements. Make sure
• you understand the contents of this manual and use it to full effect at every opportunity.
• workshop.
• following sections.
• This section explains the structure and function of each component. It serves not only to give an understanding
• of the structure, but also serves as reference material for troubleshooting.
• TESTING AND ADJUSTMENTS
• Troubleshooting charts correlating Problems to Causes are also included in this section.
• STANDARD MAINTENANCE
• This section gives the judgement standards when inspecting disassembled parts
• Start the engine and check
• Low idling without load (accelerator lever in minimum position).
• High idling without load (accelerator lever in maximum position).
• Low idling: 110050 rpm
• High idling: 270050 rpm
• Engine rpm with the pumps under load.
• Only for Pattern Change version.
• Check that the Pattern change valve is in ISO mode.
• Max. speed with parking brake engaged, in 2nd speed, and with travel lever at full stroke forward.
• 25002700 rpm
• Max. speed with parking brake engaged, in 2nd speed, with travel lever at full stroke (forward) and arm raise at the end of stroke
• 21502450 rpm