Komatsu PC300-3, PC300LC-3 & PC360LC-3 Repair Manual PDF

Serial Numbers:
PC300/LC-3: 12001 and up
PC300LC-3: A13424 and up
PC360LC-3: 10001 and up
Manuals: Shop Manual
01 GENERAL
10 ENGINE
20 POWER TRAIN
30 UNDERCARRIAGE
60 HYDRAULIC SYSTEM
80 ELECTRIC AND ELECTRONIC SYSTEM
GENERAL
This section lists the general machine dimensions, performance specifications, component weights, and fuel, coolant and lubricant specification charts.
STRUCTURE, FUNCTION AND MAINTENANCE STANDARD
This section explains the structure and function of each component. It serves not only to give an understanding of the structure, but also serves as reference material for troubleshooting.
TESTING, ADJUSTING AND TROUBLESHOOTING

This section explains checks to be made before and after performing repairs, as well as adjustments to be made at completion of the checks and repairs. Troubleshooting charts correlating Problems to Causes are also mention in this section.

DISASSEMBLY AND ASSEMBLY KOMATSU Excavator PC300-3, PC300LC-3, PC360LC-3
This section explains the order to be followed when removing, installing, disassembling or assembling each component, as well as precautions to be taken for these operations.
When raising heavy components, use a hoist or crane. Check that the wire rope, chains and hooks are free from damage.

Always use lifting equipment which has ample capacity. Install the lifting equipment at the correct places. Use a hoist or crane and operate slowly to prevent the component from hitting any other part. Do not work with any part still raised by the hoist or crane.

The manual show when the wiring is held and the connectors are pulled apart, or components are lifted with a crane with the wiring still connected, or a heavy object hits the wiring, the crimping of the connector may separate, or the soldering may be damaged, or the wiring

may be broken.