Hyster W20XTR, W30XTR Pallet Truck A455 Series Repair Manual

Repair Manual for Hyster A455 Series, Models: W20XTR, W30XTR
English

Hyster A455 Series, Models: W20XTR, W30XTR Manual Table Of Content:

Frame
DC Motor Maintenance
Master Drive Unit
Steering Mechanism
Brakes
Walkie High Lift Hydraulic System
Electrical System
Curtis Transistor Motor Controller
Industrial Battery
Battery Indicators
Mast-Description
Lift Cylinders
Mast-Repair
Reach Carriages
Metric And Inch (SAE) Fasteners
Periodic Maintenance
Diagrams
Capacities And Specifications

The Service Repair Manual provide general guidelines for maintenance and service of the A455 Series, Models: W20XTR, W30XTRand are intended for use by trained and experienced technicians. Failure to properly maintain equipment or to follow instructions contained in the Service Manual could result in damage to the products, personal injury, property damage or death.

When lifting parts or assemblies, make sure all slings, chains, or cables are correctly fastened, and that the load being lifted is balanced. Make sure the crane, cables, and chains have the capacity to support the weight of the load.

Do not lift heavy parts by hand, use a lifting mechanism.
Wear safety glasses.
DISCONNECT THE BATTERY CONNECTOR before doing any maintenance or repair on electric lift trucks. Disconnect the battery ground cable on internal combustion lift trucks.
Always use correct blocks to prevent the unit from rolling or falling. See HOW TO PUT THE LIFT TRUCK ON BLOCKS in the Operating Manual or the Periodic Maintenance section.
Caution:
Always fasten a DO NOT OPERATE tag to the controls of the unit when making repairs, or if the unit needs repairs.
Be sure to follow the WARNING and CAUTION notes in the instructions.
Gasoline, Liquid Petroleum Gas (LPG), Compressed Natural Gas (CNG), and Diesel fuel are flammable.
Be sure to follow the necessary safety precautions when handling these fuels and when working on these fuel systems.
Batteries generate flammable gas when they are being charged. Keep fire and sparks away from the area. Make sure the area is well ventilated.