Hyster S1.0, S1.2 Electric Pedestrian Stacker C441 Series Repair Manual

Repair Manual for Hyster C441 Series, Models: S1.0, S1.2
English

Hyster C441 Series, Models: S1.0, S1.2 Manual Table Of Content:

Section1: Introduction

Section 2: Installation And Settings

Section 3: Diagnostics And Measurements

Section 4: Electrical System

Secttion 5: Hydraulic System
Sezione 6: Frame Mechanics
Sezione 7: Mast Assembly Mechanics
Sezione 8: Reduction Gear
Sezione 9: Braking System
Sezione 10: Ordinary Maintenance

The Service Repair Manual provide general guidelines for maintenance and service of the C441 Series, Models: S1.0, S1.2and are intended for use by trained and experienced technicians. Failure to properly maintain equipment or to follow instructions contained in the Service Manual could result in damage to the products, personal injury, property damage or death.

When lifting parts or assemblies, make sure all slings, chains, or cables are correctly fastened, and that the load being lifted is balanced. Make sure the crane, cables, and chains have the capacity to support the weight of the load.

Do not lift heavy parts by hand, use a lifting mechanism.
Wear safety glasses.
DISCONNECT THE BATTERY CONNECTOR before doing any maintenance or repair on electric lift trucks. Disconnect the battery ground cable on internal combustion lift trucks.
Always use correct blocks to prevent the unit from rolling or falling. See HOW TO PUT THE LIFT TRUCK ON BLOCKS in the Operating Manual or the Periodic Maintenance section.
Caution:
Always fasten a DO NOT OPERATE tag to the controls of the unit when making repairs, or if the unit needs repairs.
Be sure to follow the WARNING and CAUTION notes in the instructions.
Gasoline, Liquid Petroleum Gas (LPG), Compressed Natural Gas (CNG), and Diesel fuel are flammable.
Be sure to follow the necessary safety precautions when handling these fuels and when working on these fuel systems.
Batteries generate flammable gas when they are being charged. Keep fire and sparks away from the area. Make sure the area is well ventilated.