Hyster J170XNL, J175XNL, J190XNL Electric Forklift A250 Series Repair Manual

Repair Manual for Hyster A250 Series, Models: J170XNL, J175XNL, J190XNL
English

Hyster A250 Series, Models: J170XNL, J175XNL, J190XNL Manual Table Of Content:

Industrial Battery
Metric And Inch (SAE) Fasteners
Wire Harness Repair
User Interface Supervisor
User Interface Service Technician
Hydraulic Cleanliness Procedures
Frame
Cab Repair
AC Motor Repair
Cooling System
Drive Axle And Differential Repair
Steering Axle
Steering System
Hydraulic System
Hydraulic Pump Repair
Main Control Valve (E-Hydraulic)
Cylinder Repair
Electrical System
Lithium-Ion Battery
Mast Repair
Capacities And Specifications
Diagnostic Troubleshooting Manual
Periodic Maintenance

The Service Repair Manual provide general guidelines for maintenance and service of the A250 Series, Models: J170XNL, J175XNL, J190XNLand are intended for use by trained and experienced technicians. Failure to properly maintain equipment or to follow instructions contained in the Service Manual could result in damage to the products, personal injury, property damage or death.

When lifting parts or assemblies, make sure all slings, chains, or cables are correctly fastened, and that the load being lifted is balanced. Make sure the crane, cables, and chains have the capacity to support the weight of the load.

Do not lift heavy parts by hand, use a lifting mechanism.
Wear safety glasses.
DISCONNECT THE BATTERY CONNECTOR before doing any maintenance or repair on electric lift trucks. Disconnect the battery ground cable on internal combustion lift trucks.
Always use correct blocks to prevent the unit from rolling or falling. See HOW TO PUT THE LIFT TRUCK ON BLOCKS in the Operating Manual or the Periodic Maintenance section.
Caution:
Always fasten a DO NOT OPERATE tag to the controls of the unit when making repairs, or if the unit needs repairs.
Be sure to follow the WARNING and CAUTION notes in the instructions.
Gasoline, Liquid Petroleum Gas (LPG), Compressed Natural Gas (CNG), and Diesel fuel are flammable.
Be sure to follow the necessary safety precautions when handling these fuels and when working on these fuel systems.
Batteries generate flammable gas when they are being charged. Keep fire and sparks away from the area. Make sure the area is well ventilated.