Hyster H45XM, H50XM, H55XM, H60XM, H65XM Forklift Truck H177 Series Repair Manual (USA)

Repair Manual for Hyster H177 Series, Models: H45XM, H50XM, H55XM, H60XM, H65XM (USA)
English

Hyster H177 Series, Models: H45XM, H50XM, H55XM, H60XM, H65XM (USA) Manual Table Of Content:

GM Engine Repair Gm 3.0 Liter Engine
LPG Fuel System (Gm 3.0L)
LPG Fuel System (Aisan Open-Loop)
LPG Fuel System (Aisan Closed-Loop)
Electrical LPG/Gas Fuel System Gm 3.0L/4.3L EPA Component
Mazda M4-2.0G And M4-2.2G Engine
Gasoline Fuel System (Mazda)
LPG Fuel System-Mazda
LPG Fuel System (Aisan Open-Loop)
LPG Fuel System (Aisan Closed-Loop)
Gasoline Fuel System Mazda 2.0L/2.2L Epa Componentines
Frame
Perkins 704-26 (2.6L) Engine
Cooling System
Single-Speed Powershift Transmission-Description & Oper
Single-Speed Powershift Transmission-Repair
Drive Axle
Brake System
Steering Axle
Steering Control Unit
Hydraulic System And Gear Pump
Main Control Valve
Tilt Cylinders
Mast Description
Mast Repair
Alternator With Regulator
Starter
High Energy Ignition System
Instrument Cluster
Electrical System (Mazda M4-2.0G And M4-2.2G Engines)
Microprocessor Spark Timing System (Gm 3.0L) (Early)
Eec-Descriptionripion and Operation (Gm 3.0L)
Eec-Troubleshooting And Repair (Gm 3.0L)
Eec-Repair (Gm 3.0L) (Early Modules)
Eec-Description & Oper (Gm 3.0L) (Early Modules)
Microprocessor Spark Timing System (Gm 3.0L) (Later)
Eec – Description and Operation MEFI-4
Eec – Troubleshooting And Repair MEFI-4
ECM Diagnostic. Troubleshooting Gm 3.0L/4.3L EPA Component.
ECM Diagnosticnostic Troubleshooting (Mazda 2.0L And 2.2L)
Elec. Sys. Mazda M4-2.0G/M4-2.2G Gas Epa Component.
Metric And Inch (SAE) Fasteners
Periodic Maintenance
Capacities And Specifications
Diagrams

The Service Repair Manual provide general guidelines for maintenance and service of the H177 Series, Models: H45XM, H50XM, H55XM, H60XM, H65XM (USA)and are intended for use by trained and experienced technicians. Failure to properly maintain equipment or to follow instructions contained in the Service Manual could result in damage to the products, personal injury, property damage or death.

When lifting parts or assemblies, make sure all slings, chains, or cables are correctly fastened, and that the load being lifted is balanced. Make sure the crane, cables, and chains have the capacity to support the weight of the load.

Do not lift heavy parts by hand, use a lifting mechanism.
Wear safety glasses.
DISCONNECT THE BATTERY CONNECTOR before doing any maintenance or repair on electric lift trucks. Disconnect the battery ground cable on internal combustion lift trucks.
Always use correct blocks to prevent the unit from rolling or falling. See HOW TO PUT THE LIFT TRUCK ON BLOCKS in the Operating Manual or the Periodic Maintenance section.
Caution:
Always fasten a DO NOT OPERATE tag to the controls of the unit when making repairs, or if the unit needs repairs.
Be sure to follow the WARNING and CAUTION notes in the instructions.
Gasoline, Liquid Petroleum Gas (LPG), Compressed Natural Gas (CNG), and Diesel fuel are flammable.
Be sure to follow the necessary safety precautions when handling these fuels and when working on these fuel systems.
Batteries generate flammable gas when they are being charged. Keep fire and sparks away from the area. Make sure the area is well ventilated.