For Hyster H440FS, H550FS, H550F, H620F, H620FS, H650F, H700FS, H700F Forklift Truck E008 Series, this reference brings together the listed repair manual material. Start with Cummins Qsc8.3 – Shop Manual (Overhaul) and follow the relevant document section for the task.
What’s Covered Inside
English
Hyster E008 Series, Models: H440FS, H550FS, H550F, H620F, H620FS, H650F, H700FS, H700F Manual Table Of Content:
Cummins Qsc8.3 – Shop Manual (Overhaul)
Frame
Frame-Tier 2/3
Cooling System
Three-Speed Powershift Transmission-Description and Operation (Clark)
Three-Speed Powershift Transmission-Repair (Clark)
Differential
Planetary Gear Axle
Steering Axle
Steering System
Brake System
Oil Cooled Brakes
Accumulator
Parking Brake
Service Brake
Auxiliary Brake Caliper
Hydraulic Gear Pumps
Hydraulic System
Hydraulic Plate
Tilt Cylinders
Mast
Alternator With Regulator
Starter
Instrument Panel Indicators And Senders
Extendable Container Attachment
Fixed Container Attachment
Extendable Container Attachment-Elme
Metric And Inch (SAE) Fasteners
Periodic Maintenance
Diagrams
Capacities And Specifications
Periodic Maintenance-Tier 2/3 Engine
Diagrams-Tier 2/3 Engine
Assembly Guide
The Service Repair Manual provide general guidelines for maintenance and service of the E008 Series, Models: H440FS, H550FS, H550F, H620F, H620FS, H650F, H700FS, H700Fand are intended for use by trained and experienced technicians. Failure to properly maintain equipment or to follow instructions contained in the Service Manual could result in damage to the products, personal injury, property damage or death.
When lifting parts or assemblies, make sure all slings, chains, or cables are correctly fastened, and that the load being lifted is balanced. Make sure the crane, cables, and chains have the capacity to support the weight of the load.
Do not lift heavy parts by hand, use a lifting mechanism.
Wear safety glasses.
DISCONNECT THE BATTERY CONNECTOR before doing any maintenance or repair on electric lift trucks. Disconnect the battery ground cable on internal combustion lift trucks.
Always use correct blocks to prevent the unit from rolling or falling. See HOW TO PUT THE LIFT TRUCK ON BLOCKS in the Operating Manual or the Periodic Maintenance section.
Caution:
Always fasten a DO NOT OPERATE tag to the controls of the unit when making repairs, or if the unit needs repairs.
Be sure to follow the WARNING and CAUTION notes in the instructions.
Gasoline, Liquid Petroleum Gas (LPG), Compressed Natural Gas (CNG), and Diesel fuel are flammable.
Be sure to follow the necessary safety precautions when handling these fuels and when working on these fuel systems.
Batteries generate flammable gas when they are being charged. Keep fire and sparks away from the area. Make sure the area is well ventilated.
Match the H440FS, H550FS, H550F, H620F, H620FS, H650F, H700FS, H700F application and the individual document details before using this repair manual. Refer to Cummins Qsc8.3 – Shop Manual (Overhaul) within its stated document and equipment scope.












Reviews
There are no reviews yet.