Hyster H30FT, H35FT, H40FTS Forklift Truck F001 Series Repair Manual

Repair Manual for Hyster F001 Series, Models: H30FT, H35FT, H40FTS
English

Hyster F001 Series, Models: H30FT, H35FT, H40FTS Manual Table Of Content:

Frame
Operators Cab
Mazda 2.0L And 2.2L Engines
Cooling System
LPG Fuel System Mazda 2.0L And 2.2L Engine
Gasoline Fuel System Mazda 2.0L And 2.2L
Gasoline Fuel System Mazda 2.0L And 2.2L 2007 Emission Compliant Engines
LPG Fuel System Mazda 2.0L And 2.2L 2007 Emission Compliant Engines
Electrical System Mazda
Electrical System Mazda 2.0L And 2.2L 2007 Emission Compliant Engines
Frame
Operators Cab
Yanmar Diesel Engine
Cooling System
Powershift Transmission Repair
Single Speed Powershift Aluminum Transmission Repair
Single Speed Powershift Aluminum Chain Drive Transmission
Powershift Transmission Repair
Drive Axle
Brake System
Steering Axle
Hydraulic Gear Pump
Main Control Valve
Cylinder Repair
Mast Repair 2-Stage, 3-Stage, and 4-Stage Masts
Wire Harness Repair
User Interface – Supervisor
User Interface – Service
Electrical System
Metric And Inch (SAE) Fasteners
Calibration Procedures
Diagrams
Periodic Maintenance
Capacities And Specifications
Diagrams And Schematics
Diagrams And Schematics
Diagnostics Troubleshooting
Memory Integrity Fault

The Service Repair Manual provide general guidelines for maintenance and service of the F001 Series, Models: H30FT, H35FT, H40FTSand are intended for use by trained and experienced technicians. Failure to properly maintain equipment or to follow instructions contained in the Service Manual could result in damage to the products, personal injury, property damage or death.

When lifting parts or assemblies, make sure all slings, chains, or cables are correctly fastened, and that the load being lifted is balanced. Make sure the crane, cables, and chains have the capacity to support the weight of the load.

Do not lift heavy parts by hand, use a lifting mechanism.
Wear safety glasses.
DISCONNECT THE BATTERY CONNECTOR before doing any maintenance or repair on electric lift trucks. Disconnect the battery ground cable on internal combustion lift trucks.
Always use correct blocks to prevent the unit from rolling or falling. See HOW TO PUT THE LIFT TRUCK ON BLOCKS in the Operating Manual or the Periodic Maintenance section.
Caution:
Always fasten a DO NOT OPERATE tag to the controls of the unit when making repairs, or if the unit needs repairs.
Be sure to follow the WARNING and CAUTION notes in the instructions.
Gasoline, Liquid Petroleum Gas (LPG), Compressed Natural Gas (CNG), and Diesel fuel are flammable.
Be sure to follow the necessary safety precautions when handling these fuels and when working on these fuel systems.
Batteries generate flammable gas when they are being charged. Keep fire and sparks away from the area. Make sure the area is well ventilated.