Hyster H3.0XT Forklift A409 Series Repair Manual (EU)

Repair Manual for Hyster A409 Series, Models: H3.0XT
English

Hyster A409 Series, Models: H3.0XT Manual Table Of Content:

Metric And Inch (SAE) Fasteners
Wire Harness Repair
Hydraulic Cleanliness Procedures
Diagnostic Troubleshooting Manual
Frame
Operators Cab
PSI 2.4L Engine
Yanmar 3.3L Diesel Engine
Cooling System
Fuel System PSI 2.4L
Transmission Repair
Drive Axle (Dry Brake)
Steer Axle
Brake Systems
Hydraulic Gear Pumps
Main Control Valve
Cylinder Repair
User Interface, Service
Electrical System
Electrical System PSI 2.4L
Mast Repair
Periodic Maintenance
Capacities And Specifications
Diagrams And Schematics
Calibration Procedures

The Service Repair Manual provide general guidelines for maintenance and service of the A409 Series, Models: H3.0XT and are intended for use by trained and experienced technicians. Failure to properly maintain equipment or to follow instructions contained in the Service Manual could result in damage to the products, personal injury, property damage or death.

When lifting parts or assemblies, make sure all slings, chains, or cables are correctly fastened, and that the load being lifted is balanced. Make sure the crane, cables, and chains have the capacity to support the weight of the load.

Do not lift heavy parts by hand, use a lifting mechanism.
Wear safety glasses.
DISCONNECT THE BATTERY CONNECTOR before doing any maintenance or repair on electric lift trucks. Disconnect the battery ground cable on internal combustion lift trucks.
Always use correct blocks to prevent the unit from rolling or falling. See HOW TO PUT THE LIFT TRUCK ON BLOCKS in the Operating Manual or the Periodic Maintenance section.
Caution:
Always fasten a DO NOT OPERATE tag to the controls of the unit when making repairs, or if the unit needs repairs.
Be sure to follow the WARNING and CAUTION notes in the instructions.
Gasoline, Liquid Petroleum Gas (LPG), Compressed Natural Gas (CNG), and Diesel fuel are flammable.
Be sure to follow the necessary safety precautions when handling these fuels and when working on these fuel systems.
Batteries generate flammable gas when they are being charged. Keep fire and sparks away from the area. Make sure the area is well ventilated.