Hyster H25-35XM, H40XMS Forklift E001 Series Repair Manual

Repair Manual for Hyster E001 Series, Models: H25-35XM, H40XMS
English

Hyster E001 Series, Models: H25-35XM, H40XMS Manual Table Of Content:

Frame
Mazda M4-2.0G And M4-2.2G Engine
Mazda M4-2.5D Engine
Cooling System
LPG Fuel System (Aisan Open-Loop)
LPG Fuel System
Single-Speed Powershift Transmission-Description, Operation And Repair
Drive Axle
Steering Axle
Steering Control Unit
Brake System
Hydraulic System And Gear Pump
Main Control Valve
Tilt Cylinders
Instrument Cluster
Electrical System (Mazda M4-2.0G And M4-2.2G Engines)
Electrical System (Mazda M4-2.5D)
Mast-Description
Mast-Repair
Metric And Inch (SAE) Fasteners
Diagrams
Capacities And Specifications
Periodic Maintenance

The Service Repair Manual provide general guidelines for maintenance and service of the E001 Series, Models: H25-35XM, H40XMS and are intended for use by trained and experienced technicians. Failure to properly maintain equipment or to follow instructions contained in the Service Manual could result in damage to the products, personal injury, property damage or death.

When lifting parts or assemblies, make sure all slings, chains, or cables are correctly fastened, and that the load being lifted is balanced. Make sure the crane, cables, and chains have the capacity to support the weight of the load.

Do not lift heavy parts by hand, use a lifting mechanism.
Wear safety glasses.
DISCONNECT THE BATTERY CONNECTOR before doing any maintenance or repair on electric lift trucks. Disconnect the battery ground cable on internal combustion lift trucks.
Always use correct blocks to prevent the unit from rolling or falling. See HOW TO PUT THE LIFT TRUCK ON BLOCKS in the Operating Manual or the Periodic Maintenance section.
Caution:
Always fasten a DO NOT OPERATE tag to the controls of the unit when making repairs, or if the unit needs repairs.
Be sure to follow the WARNING and CAUTION notes in the instructions.
Gasoline, Liquid Petroleum Gas (LPG), Compressed Natural Gas (CNG), and Diesel fuel are flammable.
Be sure to follow the necessary safety precautions when handling these fuels and when working on these fuel systems.
Batteries generate flammable gas when they are being charged. Keep fire and sparks away from the area. Make sure the area is well ventilated.