Hyster H2.50DX, H3.00DX Diesel & LPG ForkLift Truck A966 Series Repair Manual (EU)

Repair Manual for Hyster A966 Series, Models: H2.50DX, H3.00DX (Europe)
English

Hyster A966 Series, Models: H2.50DX, H3.00DX (Europe) Manual Table Of Content:

1) Frame
2) 4TNE92 Engine
3) Single-Speed Power Shift Transmission
Description and Operation
4) Drive Axle
5) Steering Axle (Hydro-Static)
6) Steering Housing And Control Unit(Hydro-Static Steering)
7) Brake System
8) Hydraulic System
9) Main Control Valve
10) Tilt Cylinders
11) Instrument Panel
12) Mast-Description
13) Mast-Repairs
14) Inch (SAE) And Metric Fasteners
15) Periodic Maintenance
16) Capacities And Specifications
17) Diagrams

The Service Repair Manual provide general guidelines for maintenance and service of the A966 Series, Models: H2.50DX, H3.00DX (Europe)and are intended for use by trained and experienced technicians. Failure to properly maintain equipment or to follow instructions contained in the Service Manual could result in damage to the products, personal injury, property damage or death.

When lifting parts or assemblies, make sure all slings, chains, or cables are correctly fastened, and that the load being lifted is balanced. Make sure the crane, cables, and chains have the capacity to support the weight of the load.

Do not lift heavy parts by hand, use a lifting mechanism.
Wear safety glasses.
DISCONNECT THE BATTERY CONNECTOR before doing any maintenance or repair on electric lift trucks. Disconnect the battery ground cable on internal combustion lift trucks.
Always use correct blocks to prevent the unit from rolling or falling. See HOW TO PUT THE LIFT TRUCK ON BLOCKS in the Operating Manual or the Periodic Maintenance section.
Caution:
Always fasten a DO NOT OPERATE tag to the controls of the unit when making repairs, or if the unit needs repairs.
Be sure to follow the WARNING and CAUTION notes in the instructions.
Gasoline, Liquid Petroleum Gas (LPG), Compressed Natural Gas (CNG), and Diesel fuel are flammable.
Be sure to follow the necessary safety precautions when handling these fuels and when working on these fuel systems.
Batteries generate flammable gas when they are being charged. Keep fire and sparks away from the area. Make sure the area is well ventilated.