Hyster H1050HD-16CH, H1150HD-16CH Forklift Truck G117 Series Repair Manual (USA)

Repair Manual for Hyster H007 Series, Models: H1050HD-16CH, H1150HD-16CH (USA)
English

Hyster H007 Series, Models: H1050HD-16CH, H1150HD-16CH (USA) Manual Table Of Content:

Operators Cab
Cab Heater (After Oct. 2008)
Frame
Cummins Engine Fault Code Guide
Cooling System
APC200 Fault Code Guide
Transmission Assembly Repair (TE27 And TE32)
Transmission Operation And Diagnostics
Differential
Planetary Gear Axle
Steering Axle
Steering System
Accumulator
Service Brake
Parking Brake
Hydraulic Control System
Hydraulic System
Tilt Cylinders
Mast
Extendable Container Attachment-Elme
Metric And Inch (SAE) Fasteners
Assembly Guide
Diagrams
Capacities And Specifications
Periodic Maintenance
Automatic Greasing System

The Service Repair Manual provide general guidelines for maintenance and service of the H007 Series, Models: H1050HD-16CH, H1150HD-16CH (USA)and are intended for use by trained and experienced technicians. Failure to properly maintain equipment or to follow instructions contained in the Service Manual could result in damage to the products, personal injury, property damage or death.

When lifting parts or assemblies, make sure all slings, chains, or cables are correctly fastened, and that the load being lifted is balanced. Make sure the crane, cables, and chains have the capacity to support the weight of the load.

Do not lift heavy parts by hand, use a lifting mechanism.
Wear safety glasses.
DISCONNECT THE BATTERY CONNECTOR before doing any maintenance or repair on electric lift trucks. Disconnect the battery ground cable on internal combustion lift trucks.
Always use correct blocks to prevent the unit from rolling or falling. See HOW TO PUT THE LIFT TRUCK ON BLOCKS in the Operating Manual or the Periodic Maintenance section.
Caution:
Always fasten a DO NOT OPERATE tag to the controls of the unit when making repairs, or if the unit needs repairs.
Be sure to follow the WARNING and CAUTION notes in the instructions.
Gasoline, Liquid Petroleum Gas (LPG), Compressed Natural Gas (CNG), and Diesel fuel are flammable.
Be sure to follow the necessary safety precautions when handling these fuels and when working on these fuel systems.
Batteries generate flammable gas when they are being charged. Keep fire and sparks away from the area. Make sure the area is well ventilated.