The 2015 Hino COE/HEV listing identifies 155, 155h, 195 and 195h models, with separate truck, owner, troubleshooting and J05E engine-manual entries. Its disc-brake sample addresses the bleeder plug, piston seal, piston and caliper boots.
Document Details
Hino 2015 COE HEV Truck Manual for 155, 155h, 195, 195h Series – 842 Pages
Hino 2015 COE HEV Owners Manual – 338 Pages
Troubleshooting Hino 2015 Manual – 860 Pages
Hino J05E Engine Manual – 647 Pages
This is the Repair and Service Manual for Hino Truck 2015 COE HEV
Applicable for HINO 155, 155h, 195, 195h series,
This workshop manual has been prepared to provide information covering repairs on 155, 155h, 195, 195h Series Hino 2015 COE HEV trucks.
Contents Listed
General Introduction
Engine
Hybrid System
Transmission
Clutch
Propeller Shaft
Axle
Differential
Brake
Steering
Frame and Frame Accessory
Cab Mounting and Cab Suspension
Body Construction
Suspension
Body Inside Accessory
Body Outside Accessory
Air Bag and Seat Belt
Heater and Air Conditioner
Electrical
Control System
Procedure Excerpt
Hino Truck 2015 COE HEV Manual Instruction Extract:
INSTALLING THE DISC BRAKE
1. INSTALLING THE BLEEDER PLUG CAP
2. TEMPORARILY TIGHTENING THE BLEEDER PLUG 3. INSTALLING THE PISTON SEAL
(1) Apply lithium soap base glycol grease to the entire circumference of the new piston seal and install it to the groove of the brake caliper.
4. INSTALLING THE PISTON
(1) Apply lithium soap base glycol grease to the new disc caliper boots (2 pcs.).
(2) Install the cylinder boots to the groove of the piston.
! CAUTION Install the cylinder boots securely to the groove of the piston.
(3) Apply lithium soap base glycol grease thinly to the piston circumference and install it to the disc caliper.
! CAUTION Do not forcefully push the piston in.
5. INSTALLING THE DISC CALIPER BOOT
(1) Install the disc caliper boots (2 pcs.) to the disc caliper.
! CAUTION Install the cylinder boot securely to the groove of the disc caliper.
Match each listed document to its model and year. Read procedure excerpts within the full manual section and use the referenced safety instructions; tools mentioned in a procedure are not included with the documentation.












Reviews
There are no reviews yet.