Challenger MT635B, MT645B, MT655B and MT665B Tractor Workshop Manual Bundle

Challenger MT635B, MT645B, MT655B, MT665B Tractor Workshop Manual : 1243 Pages
Parts Catalog MT600B: 439 Pages
Challenger MT635B, MT645B, MT655B, MT665B Tractor Repair Workshop Manual
Manual for: AGCO Challenger MT600B Series Tractor
Book Number: 3378718M2
English
Issued May 2016

Challenger MT600B Series Manual TABLE OF CONTENTS

01 – Introduction – Specifications
03 – Engine
05 – Gearbox
06 – Rear axle
07 – Power take off
08 – Front axle
09 – Hydraulics
10 – Electrical equipment
11 – Electronics
12 – Cab and equipment
MT635B, MT645B, MT655B, MT665B Manual Extract – Calibration error
| Errors
| Description
| Solutions
| 41D1
| Incorrect preliminary operations for
transmission calibration
| Ensure that all steps are followed (see GUF404)
| 41D2
| After switching the ignition off, the Autotronic 4 internal relay does not break down
| – Check the connection with the transmission control module (TR18)
– Change the Autotronic 4
| 41D3
| The control module does not control with the exact specified value
| Check the mobility of the transmission control by engaging limp home mode for example.
| 41D4
| Transmission ratio adjustment not performed within 8 seconds time.
| Check the mobility of the transmission control by engaging limp home mode for example.
| 41D5
| Step 1: Neutral position “0” cannot be found in the forward direction
Step 2: Neutral position “0” cannot be found in the reverse direction
| Check the connection with the transmission control module (TR18)
| 41D6
| Transmission ratio adjustment not performed within 8 seconds time.
| Check the mobility of the transmission control by engaging limp home mode for example
| 41D7
| Step 2: The forward and reverse “0” neutral positions are more than 8° apart
| Check the connection with the transmission control module (TR18)