For Case Farmall 75N, 85N, 95N, 105N, 105V Tractor, this reference brings together the listed repair manual material. Start with Engine and follow the relevant document section for the task.
What’s Covered Inside
75N with cab PIN Z8)F19102 – ZCJF 10907
75N with cab PIN ZCJF06107 and above
75N without cab PIN Z9FO1865 -ZCF07697
75N without cab PIN ZCJF07813 and above
85N with cob PIN ZB)F1 7086 – ZCJF09425
85N with cab PIN ZCJF08828 and above
85N without cab PIN Z9)F01936 – ZCIF 10868
85N without cab PIN ZCIF16077 and above
95N with cab PIN Z9)F00469 -ZCJF 10732
95N with cab PIN ZCJF13045 and above
95N without cab PIN Z9)F01090 – ZCJF05141
95N without cab PIN ZCJF 15989 and above
105N with cab PIN ZBIF20417 and above
105N without cab PIN ZCjF16900 and above
105V with cab PIN ZBIF20562 and above
105V without cab PIN ZD/F09419 and above
Manuals: Service Manual
Table of Content (Service Manual)
Introduction
Engine
Clutch
Transmission
Four Wheel Drive
Front Axle
Rear Axle
Power Take Off
Brake and Controls
Hydraulic Systems
Hitches, Drawbars and implement couplings
Steering
wheels
Cab climate control
Electrical System
Platform, cab, bodywork and decals
Special Tools
Manual Extract: Remote control valve – Install
Refit the auxiliary control valves and the trailer brake valve as described here:
Fit the control valves together with the bracket and lock the bolts securing the bracket to the engine.
Connect the control valve tie rods.
Refit the two hydraulic hoses connected to the control valves.
Fit the trailer brake valve and lock it with the two retaining bolts.
Disconnect the six pipes connected to the trailer brake valve.
Check the oil level and top up if necessary.
Connect the battery negative lead.
With the engine running, carry out a few operations using the controls of the control valves and check there is no leakage from the pipes.
Use publication 47888397 (July 2016) & 84241675 with the 75N with cab PIN Z8)F19102 – ZCJF 10907, 75N with cab PIN ZCJF06107 and above, 75N without cab PIN Z9FO1865 -ZCF07697, 75N without cab PIN ZCJF07813 and above, 85N with cob PIN ZB)F1 7086 – ZCJF09425, 85N with cab PIN ZCJF08828 and above, 85N without cab PIN Z9)F01936 – ZCIF 10868, 85N without cab PIN ZCIF16077 and above, 95N with cab PIN Z9)F00469 -ZCJF 10732, 95N with cab PIN ZCJF13045 and above, 95N without cab PIN Z9)F01090 – ZCJF05141, 95N without cab PIN ZCJF 15989 and above, 105N with cab PIN ZBIF20417 and above, 105N without cab PIN ZCjF16900 and above, 105V with cab PIN ZBIF20562 and above, 105V without cab PIN ZD/F09419 and above model details to select the appropriate documentation. Refer to Engine within its stated document and equipment scope.










Reviews
There are no reviews yet.