For Case Farmall 55C, 65C, 75C Tractor, this reference brings together the listed repair manual material. Start with General and follow the relevant document section for the task.
What’s Covered Inside
General
Engine
Clutch
Gear Transmission
Drive Lines
Front Axle
Rear Axle
Power Take Off
Brakes
Hydraulic Systems
Hitches, Drawbars and implement couplings
Steering
Cab Air Conditioning System
Electrical System
Cab
Manual Extract: BRAKE TROUBLESHOOTING
| Problems
| Possible causes
| Solutions
| Brake pedals hard to operate.
The brakes stick when the pedals
are released.
Noisy brakes.
Pedal stroke too long.
Unbalanced braking.
| 1. Corresponding master cylinder seized.
2. Brake control pipes obstructed or pinched.
1. Brake control pump pistons locked.
2. Master cylinders seized.
1. Friction material on brake disks (1, fig. 2) worn.
1. Air in the brake circuit.
2. Brake control pumps worn.
3. Leakage from control pipes.
1. Wrong tire pressure.
2. Brake control pumps worn.
3. Pump connection pipes obstructed or pinched.
4. Brake control pipes obstructed or pinched.
5. Pump control piston seals worn or damaged.
6. Friction material on brake disk (1, fig. 2) worn.
| Replace the brake control pumps.
Clean or replace the control pipes.
Release the piston and, if necessary, replace the brake control pumps.
Replace the brake control pumps. Replace the brake disks.
Bleed air from the brake circuit. Replace the brake control pumps. Eliminate the cause of the leakage. Inflate tires to correct pressure. Replace the brake control pumps. Clean or replace the pipes.
Clean or replace the control pipes.
Replace the brake control pumps.
Replace disk.
Use publication 84419878A (Oct 2011) with the Farmall 55C, 65C, 75C model details to select the appropriate documentation. Refer to General within its stated document and equipment scope.










Reviews
There are no reviews yet.