Case Farmall 31, 35 Tractor Repair Manual

Manuals: Service Manual

SECTION 00 – GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

SECTION 10 – ENGINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

SECTION 18 – CLUTCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

SECTION 21 – GEAR TRANSMISSION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

SECTION 25 – FWD FRONT AXLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

SECTION 27 – DIFFERENTIAL, REAR AXLE . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

SECTION 29- HYDROSTATIC TRANSMISSION . . . . . . . . . . . . . . . . . . . . . . . . 18

SECTION 31 – POWER TAKE-OFF SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . . . . 22

SECTION 33 – BRAKES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

SECTION 35 – HYDRAULIC SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

SECTION 41 – STEERING SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

SECTION 44 – WHEELS AND TIRES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

SECTION 55 – ELECTRICAL SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

SECTION 90 – PLATFORM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

The following pages are the collation of the contents pages from each section and chapter of the Farmall 31, Farm all 35 Repair manual. Complete Repair part# 84132127.
Manual Extract: WATER PUMP Removal
1. Remove the radiator assembly. See “Radiator Removal” discussed previously in this section.
2. Loosen the alternator mounting bolts, 1 , and adjusting bracket and remove the drive belt, 2.
3. Remove the attaching bolts, 1, cooling fan, 2, fan holder, 3, and pulley, 4.
4. Remove the bypass hose, 1 , and lower radiator hose, 2, from the water pump, 3.
5. Remove the water pump retaining bolts, 4, and remove the water pump, 3, and gasket, 5, from engine.
6. Remove the mounting plate bolts, 6, mounting plate, 7, and gasket, 8.