Case DX18E, DX22E, DX24E, DX25E Tractor Repair Manual

Manuals: Service Manual

SECTION 00 – GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

SECTION 10 – ENGINE SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

SECTION 25 – FWD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

SECTION 27 – DIFFERENTIAL AND REAR AXLES . . . . . . . . . . . . . . . . . . . . . 13

SECTION 29 – HYDROSTATIC TRANSMISSION . . . . . . . . . . . . . . . . . . . . . . . . 14

SECTION 31 – PTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

SECTION 33 – BRAKES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

SECTION 35 – HYDRAULIC SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

SECTION 41 – POWER STEERING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

SECTION 44 – WHEELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

SECTION 55 – ELECTRICAL SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

SECTION 58 – MWX154S — MWX160S MID MOUNT MOWER . . . . . . . . . . . . 34

SECTION 90 – PLATFORM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

The following pages are the collation of the contents pages from each section and chapter of the DX18E, DX22E, DX24E, and DX25E Repair manual. Complete Repair Manual # 87352316.
Manual Extract:
FLYWHEEL
Removal
1. Loosen the flywheel retaining bolts, 1.
2. Using a brass drift and hammer, tap the end of the crankshaft, 2, to loosen the flywheel, 3, from the shaft.
3. Remove the retaining bolts, lock washers, and flywheel from the crankshaft.
BACKPLATE AND OIL SEAL Removal
1. Remove the backplate retaining bolts and remove the backplate.
2. Remove the rear oil seal, 1.
CRANKSHAFT AND MAIN BEARINGS Removal
1. Remove the crankshaft bearing holder retaining bolts, 1.
2. Slide the crankshaft and main bearing assembly through the rear of the engine.