Case 450, 465, 450CT Series 3 SkidSteer Repair Manual
Case 450, 465, 450CT Series 3 SkidSteer Repair Manual - Image 2
Case 450, 465, 450CT Series 3 SkidSteer Repair Manual - Image 3
Case 450, 465, 450CT Series 3 SkidSteer Repair Manual - Image 4
Case 450, 465, 450CT Series 3 SkidSteer Repair Manual - Image 5
Case 450, 465, 450CT Series 3 SkidSteer Repair Manual
Case 450, 465, 450CT Series 3 SkidSteer Repair Manual - Image 2
Case 450, 465, 450CT Series 3 SkidSteer Repair Manual - Image 3
Case 450, 465, 450CT Series 3 SkidSteer Repair Manual - Image 4
Case 450, 465, 450CT Series 3 SkidSteer Repair Manual - Image 5

THE MANUAL LIBRARY

Case 450, 465, 450CT Series 3 SkidSteer Repair Manual

$34.00

Documentation Specifications

Manufacturer Case
Applicable Model 450, 465, 450CT Series 3
Machine Type SkidSteer
Documentation Service Manual
Publication Reference 87634780 (Jan 2008)
Language English
Format PDF

Manuals Provided

Service Manual 1523 pages
Categories: ,

The Case 450, 465 and 450CT Series 3 service manual is listed at 1,523 pages under publication 87634780, dated January 2008. Its eight contents headings cover machine systems, working arms and couplers; a separate sample describes auxiliary oil-cooler installation.

Document Details

Manuals: Service Manual

Contents Listed

Introduction

Distribution Systems

Power Production

Power Train

Travelling

Body Structure

Working Arm

Tools and Couplers

Procedure Excerpt

Manual Extract: Oil cooler – Install

1. Install the second auxiliary oil cooler into the mounting location.

2. Install and tighten the mounting bolts in the oil cooler mounting bracket.

3. Start the vacuum pump. Reservoir -Apply vacuum (A.10.A)

4. Remove the caps from the fittings and plugs from the hoses.

5. Install the hydraulic lines onto the oil cooler and tighten the fittings.

6. Stop the vacuum pump.

7. Remove the vacuum pump from the reservoir.

8. Start and run the engine at low idle for 2 to 5 minutes and check for any leaks.

9. Check the oil level in the hydraulic reservoir and add oil as required. Reservoir – Filling (A.10.A)

Match the listed manual to the machine and publication reference. Page counts and publication references remain separately listed where the source does not pair them. Procedure samples retain their component names, notices and diagram references; use them within the full manual section. Referenced tools are not supplied with the documentation.

Reviews

There are no reviews yet.

Be the first to review “Case 450, 465, 450CT Series 3 SkidSteer Repair Manual”