Case 1845C SkidSteer Repair Manual

Model: Case 1845C
Manuals: Service Manual
General
Engines
Fuel System
Electrical
Power Train
Brakes
Hydraulics
Mounted Equipment
Manual Extract: Fuel Injector Tester

A Diesel Fuel Injection Nozzle Tester, OEM 1064, is needed for checking and adjusting the injectors. The following instructions will work for all models of testers except for descriptions on adjustments to the tester.

Operating instructions are given with the tester.
The tester is used to make the following checks:
1. Check and adjust the injector opening pressure.
2. Check the injector assembly for fuel leakage.
3. Check the injector for accurate spring pattern.
Fuel injectors must be checked on the tester when making the following service operations:
1. An injector that has been removed from the engine for cleaning, must be checked on the tester before the injector can be installed in the engine.
2. A new injector assembly must be checked on the tester before the injector can be installed in the engine.
3. All the injectors must be removed and checked on the tester during an engine overhaul.
4. An injector must be removed and checked on the tester before the injector is disassembled, if the injector is the cause of engine performance that is not acceptable.