Case SV208, SV210 Vibratory Roller Repair Manual

Manuals: Service Manual
Introduction
Engine
Power Coupling
Hydrostatic drive
Brakes and Controls
Hydraulic System
Frames and Ballasting
Steering
Wheels
Cab Climate Control
Electrical System
Manual Extract: Compaction/vibration hydraulic system – Change fluid
NOTICE: Oil is best changed after roller operation, when the impurities are diffused within the medium.
1. Park the roller on a flat, paved area so that the drain plug (1) on the left-hand side of the drum is in its lowest position.
2. Place a suitable container underneath the plug.
3. Remove all the plugs and drain the oil.
4. Once drained, reinstall the drain plug (1).
5. Use the filler hole (2) to replenish the oil. Fill to the edge of the inspection hole (3).
6. Reinstall the remaining plugs