For Case 821E Wheel Loader, this reference brings together the listed repair manual material. Start with Engine and follow the relevant document section for the task.
What’s Covered Inside
Manuals: Service Manual
Introduction
Engine
Transmission
Front Axle
Rear Axle
Brakes and Controls
Hydraulic System
Steering
Wheels
Cab climate control
Electrical System
Front Loader and Bucket
Special Tool Index
Manual Extract: STEERING PRIORITY VALVE REMOVAL
1. Park loader on level ground and lower bucket to ground. Put transmission in NEUTRAL, apply parking brake, and shut down engine, 2. Put master disconnect switch in OFF position.
3. Remove all dirt and grease from steering priority valve (7) and adjacent area. See illustration on page 11.
4. Remove hydraulic reservoir fill cap.
5. Connect a vacuum pump to hydraulic reservoir.
6. Start vacuum pump.
7. Tag and disconnect all hoses connected to the steering priority valve (7).
8. Loosen and remove eight bolts (4) and four spit flanges (3).
9. Remove the high pressure pump discharge tube (5), discard O-rings (6).
10. Support the steering priority valve (7), remove mounting bolts (8).
11. Remove steering priority valve (7).
Introduction
Engine
Transmission
Front Axle
Rear Axle
Brakes and Controls
Hydraulic System
Steering
Wheels
Cab climate control
Electrical System
Front Loader and Bucket
Special Tool Index
Manual Extract: STEERING PRIORITY VALVE REMOVAL
1. Park loader on level ground and lower bucket to ground. Put transmission in NEUTRAL, apply parking brake, and shut down engine, 2. Put master disconnect switch in OFF position.
3. Remove all dirt and grease from steering priority valve (7) and adjacent area. See illustration on page 11.
4. Remove hydraulic reservoir fill cap.
5. Connect a vacuum pump to hydraulic reservoir.
6. Start vacuum pump.
7. Tag and disconnect all hoses connected to the steering priority valve (7).
8. Loosen and remove eight bolts (4) and four spit flanges (3).
9. Remove the high pressure pump discharge tube (5), discard O-rings (6).
10. Support the steering priority valve (7), remove mounting bolts (8).
11. Remove steering priority valve (7).
Use publication 71114025 (Feb 2016) & 84299244 (Dec 2009) with the 821E model details to select the appropriate documentation. Refer to Engine within its stated document and equipment scope.












Reviews
There are no reviews yet.