For Case 580K Loader Backhoe, this reference brings together the listed repair manual material. Start with General and follow the relevant document section for the task.
What’s Covered Inside
Manuals: Service Manual
General
Engine
Fuel System
Electrical
Steering
Power Train
Brakes
Hydraulics
Mounted Equipment
Manual Extract Measuring Toe-In
1. Raise the front of the machine until the front wheels are free of the floor.
2. Hold a tool that has a sharp point against the center of the tire tread.
3. Hold the tool in one place and rotate the wheel to make a fine line around the tire. Repeat this procedure for the other front wheel.
4. Lower the front wheels to the floor.
5. Turn the steering wheel as needed to put the front wheels in the straight position.
6. Measure the distance between the marks at the front and rear of the tires.
7. The measurement at the rear of the tires must be 0 to 3/16 inch (Oto 5 mm) more than the measurement at the front of the tires.
General
Engine
Fuel System
Electrical
Steering
Power Train
Brakes
Hydraulics
Mounted Equipment
Manual Extract Measuring Toe-In
1. Raise the front of the machine until the front wheels are free of the floor.
2. Hold a tool that has a sharp point against the center of the tire tread.
3. Hold the tool in one place and rotate the wheel to make a fine line around the tire. Repeat this procedure for the other front wheel.
4. Lower the front wheels to the floor.
5. Turn the steering wheel as needed to put the front wheels in the straight position.
6. Measure the distance between the marks at the front and rear of the tires.
7. The measurement at the rear of the tires must be 0 to 3/16 inch (Oto 5 mm) more than the measurement at the front of the tires.
Use publication 8-12250 (Nov 1989) with the 580K model details to select the appropriate documentation. Refer to General within its stated document and equipment scope.










Reviews
There are no reviews yet.