Case CX800B Crawler Excavator Repair Manual

Manuals: Service Manual

Contents

Introduction

Engine

Hydraulic systems

Frames and ballasting

Tracks and track suspension

Cab climate control

Electrical systems

Booms, dippers and buckets

Platform, cab, bodywork and decals

Special Tool index

Hydraulic Schematics

Electrical Schematics

Manual Extract: Turbocharger exhaust pipe installation

1. Install the gasket to the turbocharger exhaust pipe (1).

NOTICE: Make sure to install the gasket with its yellow marking surface installed to the turbocharger exhaust pipe (1) so that it can be seen.

Do not deform the gasket when installing. Install a new gasket.

Do not reuse the gasket.

2. Install the turbocharger exhaust pipe (1) to the turbocharger assembly (2).

NOTE: Install the V-band (3) to the turbocharger exhaust pipe (1).

NOTICE: Make sure there are no gasket fragments in the turbocharger exhaust pipe (1).

Insert the turbocharger exhaust pipe (1) until it makes full contact.

Tightening torque: 16 N·m (11.80 lb ft) PAWE1BSH005601 72

3. Install the turbocharger exhaust pipe (3) to the bracket.

Tightening torque: 50 N·m (36.88 lb ft) 1. Exhaust pipe bracket

2. V-band