Case CX700B Crawler Excavator Repair Manual

Manuals: Service Manual
General Information
Engine
Fuel System
Frames and ballasting
Electrical systems
Undercarriage
Drive Train
Upper structure Hydraulics
Upper structure
Manual Extract: REMOVAL OF TAKE-UP ROLLER
1 Removal of take-up roller[1] Remove the shoe assembly.
See the “Removal and Installation of Shoe Assembly” procedure.[2] Use a crowbar (3) to pull off the take-up roller (1) from the side frame (2).[3] Install the lifting equipment (4) on the take-up roller (1) and hang it from the side frame (2) with the crane.[4] Place the take-up roller (1) onto wood planks (6) as in the diagram. Use a wrench to remove the bolt (5) and separate the take-up roller and the grease cylinder (4).