Case CX18C Mini Excavator Repair Manual

Manuals: Service Manual
Introduction
Engine
Hydraulics System
Frames and Ballasting
Tracks and Track Suspension
Electrical System
Booms, dippers and buckets
Dozer Blade and Arm
Platform, cab, bodywork and decals
Electrical Schematic
Hydraulic Schematic
Manual Extract: Radiator – Engine – Disassemble
1. Prepare a clean, flat working surface on a workbench large enough to accommodate the engine components.
2. Discard all used gaskets, O-rings and seals. Use new gaskets, O-rings and seals during reassembly of engine.
3. Identify all parts and their location using an appropriate method. It is important that all parts are returned to the same position during the reassembly process.
4. Remove the electrical connections, the intake and exhaust system connections, and fuel supply lines from the engine.
5. Drain the engine coolant from the radiator and cylinder block.
6. Remove the engine from the machine. Mount the engine to a suitable engine repair stand having adequate weight capacity.
NOTICE: be sure to secure the engine solidly to prevent injury or damage to parts due to the engine falling during work on the engine.

7. Clean the engine by washing with solvent, air or steam cleaning. Carefully operate so as to prevent any foreign matter or fluids from entering the engine or any fuel system or electrical components remaining on the engine.

8. Drain the engine oil into a suitable container.
9. Remove the cylinder head (refer to Cylinder heads Disassemble (10.101)).