Name: Case 1085C Excavator Repair Manual
Brand: Excavator
Availability: InStock

Case 1085C Excavator Repair Manual

$35.00

Documentation Specifications

Manufacturer	Case
Applicable Model	1085C
Machine Type	Excavator
Documentation	Service Manual
Publication Reference	8-14840 (May 2000)
Language	English
Format	PDF

Manuals Provided

Service Manual

1247 pages

The Case 1085C excavator service manual covers the engine, fuel and electrical systems, steering, power train, brakes, hydraulics and mounted equipment. A separate sample passage describes the torque-converter oil heating procedure.

Document Details

Model: Case 1085C

Manuals: Service Manual

Contents Listed

General

Engines

Fuel System

Electrical

Steering

Power Train

Brakes

Hydraulics

Mounted Equipment

Procedure Excerpt

Manual Extract:

Procedure to Heat the Oil

Torque Converter

1. Start the engine and run the engine at low idle.

2. Make sure that the parking brake is released.

3. Push down and hold the brake pedal for the remainder of this procedure.

4. Put the the transmission range switch in the HIGH range.

5. Move the transmission shift lever to the THIRD position in FORWARD.

6. Move the hand throttle back to the TRAVEL (DETENT) position.

7. Increase the engine speed to full throttle and run the engine at this speed for one minute.

8. Decrease the engine speed to low idle and move the transmission shift lever to NEUTRAL for 30 seconds.

9. Repeat steps 3 through 8 until the temperature of the torque converter oil is between 180° to 220° F (82° to 104°C).

Match the machine model and publication reference before using the manual. Read the procedure excerpt within its complete manual section, including the referenced precautions and specifications.

Reviews

There are no reviews yet.