The Case 310, 340 and 380 Rowtrac Magnum listing separates whole-tractor service-manual options by the stated serial/PIN groups and CVT or powershift transmission. Its machine contents are followed by a coolant-control-valve removal sample and the preceding cooling-system emptying reference.
Document Details
Case 310, 340, 380 Rowtrac Magnum Tractor Service Manual:
1. Serial/PIN Starting with ZFRF05001 till ZFRF08099
Continuously Variable Transmission (CVT) – 5016 Pages
Powershift Transmission (PST): 5012 Pages
2. Serial/PIN Starting with ZERF08100 and above
Continuously Variable Transmission (CVT) – 4736 Pages
Powershift Transmission (PST): 4770 Pages
3. Serial/PIN Starting with ZGRF05001 and above; ZHRF01001 till ZHRF04000
Continuously Variable Transmission (CVT) – 5592 Pages
Powershift Transmission (PST): 5632 Pages
4. Serial/PIN Starting with ZHRF04001 and above
Continuously Variable Transmission (CVT) – 5700 Pages
Powershift Transmission (PST): 5668 Pages
1st edition
English
February 2018
Case 310, 340, 380 Rowtrac Magnum Tractor Manual
Rowtrac Magnum Tractor Model: 310, 340, 380
Publication Number: 47748111 & 47917643 & 48115455 & 51431498
1st edition
English
February 2018
Format: PDF
Case 310, 340, 380 Rowtrac Magnum Tractor Service Manual:
1. Serial/PIN Starting with ZFRF05001 till ZFRF08099
Continuously Variable Transmission (CVT) – 5016 Pages
Powershift Transmission (PST): 5012 Pages
2. Serial/PIN Starting with ZERF08100 and above
Continuously Variable Transmission (CVT) – 4736 Pages
Powershift Transmission (PST): 4770 Pages
3. Serial/PIN Starting with ZGRF05001 and above; ZHRF01001 till ZHRF04000
Continuously Variable Transmission (CVT) – 5592 Pages
Powershift Transmission (PST): 5632 Pages
4. Serial/PIN Starting with ZHRF04001 and above
Continuously Variable Transmission (CVT) – 5700 Pages
Powershift Transmission (PST): 5668 Pages
Source Heading
Manual Table of Content:
Contents
Contents Listed
Introduction
Engine
Power Coupling
Transmission
Four Wheel Drive (4WD) System
Rear Axle System
Power Take Off (PTO)
Brakes and Controls
Hydraulic System
Hitches, drawbars and implement couplings
Frames and ballasting
Steering
Wheels
Cab Climate Control
Electrical Systems
Plateform, Cab, bodywork and decals
Special Tool Index
Electrical Schematic
Hydraulic Schematic
Procedure Excerpt
Manual Extract:
Coolant control valve –
Remove Prior operation:
Engine cooling system – Emptying (10.400)
1. Disconnect the electrical connector from the coolant control valve.
2. Disconnect the coolant lines (1) and the DEF fluid line (2).
3. Remove the mounting bolts (1)
Each CVT or PST entry is a whole-tractor manual option for its stated source serial/PIN group. The four publication references remain unallocated by list order. The three removal actions are an excerpt; no later removal, installation or adjustment steps have been added.
Match the stated model and document option before using the manual. Procedure samples retain their original conditions and component references and should be read within the full manual section. Tools and equipment mentioned in the documentation are not supplied with it.














Reviews
There are no reviews yet.